Sample Codeplugs

WARNING! PLEASE READ THIS NOTICE ABOUT THE BAOFENG D, TYT MD-398 AND RADIODDITY RADIOS!

ANYTONE USERS: Please make an effort to keep your firmware up to date. Check the Bridgecom, Powerwerx and Connect Systems pages to ensure you’re aware of the latest available firmware, and don’t forget to perform the MCU reset that’s indicated in the instructions. Thank you!

Rocky Mountain Ham Radio maintains a Google Group that will keep you informed of codeplug changes. If you’d like to subscribe to the Google Group, please send a message to the group owner(s). You MUST INCLUDE YOUR EMAIL ADDRESS in the body of the message! CLICK HERE. This link may also be used to send private messages to the list owner(s) This Codeplug Subscriber’s Google Group is available to notify other users about DMR programming if you choose to share what you learn.

RMHam provides these sample codeplugs (DMR radio programs) as a service to its members who are encouraged to use them as a template to create/tailor a codeplug personalized for their own use. They are not intended to be all inclusive. These codeplugs are maintained by volunteers. If you don’t see a codeplug for your radio, it’s likely not popular enough for someone to create a “sample codeplug.” Consider supporting DMR and RMHAM radio by creating a codeplug for your radio and supplying updates as they are needed to us.

If you don’t see it listed here, we don’t support codeplugs on that radio type.  We likely don’t have anything on it and we’re not going to support a one-off.

If you want to get into DMR, the learning curve is massively steep.  Think very carefully before you buy something that is NOT listed here.

Please note that these codeplugs are only updated when errors are identified or compelling additions need to be made. End users are encouraged to maintain the contact lists in their codeplugs themselves.

Comments, and questions, please contact the individual codeplug maintainers directly.

ManufacturerCodeplugLast  UpdateMaintainer(s)Notes
AnytoneAT-D868UV / AT-D878UV / AT-D578UVMarch 9, 2021K0NGA Mike (k0nga@arrl.net)Corrected the "DMR Mode" setting on all repeater and hotspot DMR channels. Added upcoming RMHAM Boulder Lee Hill Repeater
Connect SystemsCS580 / CS700 / CS750 / CS800 / Channels ExportMarch 9, 2021K0NGA Mike (k0nga@arrl.net)Added upcoming RMHAM Boulder Lee Hill Repeater
HyteraAR482GMarch 9, 2021K0NGA Mike (k0nga@arrl.net)Added upcoming RMHAM Boulder Lee Hill Repeater
MotorolaXPR4550 Low PowerNov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
MotorolaXPR4550 High PowerNov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
MotorolaXPR5550 Low PowerNov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
MotorolaXPR5550 High PowerNov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
MotorolaXPR5550e High PowerNov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
MotorolaXPR6550Nov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
MotorolaXPR7550Nov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
MotorolaXPR7550eNov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
MotorolaSL7550Nov 08 2021KI0KN James (james.m.cizek@gmail.com)Updated Grand Junction ColorCode to 5
TeraTR-7400March 9, 2021K0NGA Mike (k0nga@arrl.net)Added upcoming RMHAM Boulder Lee Hill Repeater
TyteraMD380 / MD2017March 9, 2021K0NGA Mike (k0nga@arrl.net)Added upcoming RMHAM Boulder Lee Hill Repeater

To any prospective codeplug maintainers:

There are requirements that RMHAM has to have your codeplug listed on this system.

  1. The codeplug must follow the same layout as the standard RMHAM codeplug, same layout, channels, zones, systems to match.  We do realize that there are differences that cannot be supported in all radios and we will allow that.
  2. The maintainer MUST commit to updating the codeplugs when changes are made (ie, color code changes, talkgroup changes, new sites, etc.)  If you choose not to update your codeplugs when necessary, your codeplugs will be removed from the list.
  3. You do not have to maintain the contact list.
  4. Please contact Mike k0nga@arrl.net to have the codeplug listed.  Please allow a few days for him to answer your emails.  Other contacts will only delay your response!